防傾桿 作用
可調傾桿使用增加或減少的傾桿臂的長度來改變其傾斜速率。針對不同的情況來做調整傾桿剛性，而無需更換整支條傾桿的。使用較硬朗的傾桿設定，這樣會增加了所需移動彼此的左右車輪的力量，使得車身側傾受到有效的控制 |
前20mm 可調兩段 / 李子串 三段
| BSF45Z
| | | |
| Front Sway bar - 20mm heavy duty blade adjustable
| | |
| Incl KLC179 - 3 point adjustable | | |
| | | | |
| | | | |
| This Whiteline 20mm 2 point adjustable sway bar including high performance adjustable link = more gr... <read more> |
| | | | |
前22mm競技兩段可調/ 李子串 三段可調
| BSF45XZ
| | | |
| Front Sway bar - 22mm X heavy duty blade adjustable
| | |
| Incl KLC179 - 3 point adjustable | | |
| This Whiteline 20mm 2 point adjustable sway bar including high performance adjustable link = more gr... <read more> |
| | | | |
後16mm兩段可調
| BSR53Z
| | | |
| Rear Sway bar - 16mm heavy duty blade adjustable
| | |
| NOTES: IMPORTANT
| | | |
| 3 point adjustable | | | |
| | | | |
| | | | |
後18mm競技可調
| BSR53XZ
| | | |
| Rear Sway bar - 18mm X heavy duty blade adjustable
| | |
| 3 point adjustable | | | |
| This Whiteline 18mm 3 point adjustable sway bar = more grip = better handling = outright performance... <read more> |
| | | | |
後16mm可調 含 李子串 與 強化傾桿座支架 (強化傾桿座支架剛性) |
| | | |
| Rear Sway bar - 16mm heavy duty blade adjustable
| | |
| Incl KLC182 & KBR38 - 3 point adjustable | | |
| This Whiteline 16mm 3 point adjustable sway bar plus support brace and drop links = more grip = bett... <read more> |
| | | | |
後18mm可調 含 李子串 與 強化傾桿座支架 (強化傾桿座支架剛性)
| BSR54XZ
| | | |
| Rear Sway bar - 18mm X heavy duty blade adjustable
| | |
| Incl KLC182 & KBR38 - 3 point adjustable | | |
| | | | |
| 前引擎室與後拉桿 |
4點式下前控制臂拉桿
| KSB731
| | | |
| Front Brace - lower control arm
| | |
| Steel 4 point | | | |
| 功能: 連接的前左右控制臂。當車子做右轉，大部分的重量因右輪被擠壓後轉移到左前輪胎。這意味著該底盤將面臨扭轉/彎曲的慣性動作會落在在該角落。通過連接的前左右控制臂可以減少這種彎曲，這樣可以使你的輪胎在地面上種植更好地為您去通過彎道 | Whiteline chassis bracing maintains alignment angles & spring rates by greatly reducing body or ... <read more> |
| | | | |
前引擎室拉桿
| KSB652
| | | |
| Front Brace - strut tower
| | | |
| Whiteline strut tower bracing are very simple to install & feature light weight polished alumini... <read more> |
| | | | |
後拉桿
| KBR38
| | | |
| Rear Brace - sway bar mount support
| | |
| Steel 2 point | | | |
| Rear sway bar mount support Brace increases the stiffness of the rear sway bar mounting bracket &... <read more> |
| | | | |
| | | | |
| 車體強化, 底盤強化橡膠, 其他 |
| CAMBER 螺絲 | KCA416
| | | |
| Front Camber adjusting bolt kit - 16mm
| | |
| Adds +/- 1.5o camber | | | |
| The biggest adjustment range up to +/- 1.75 deg. Unlike other “friction” lock designs we use a posit... <read more> |
| | | | |
| (前輪)下前控制臂強化橡膠 | KCA434
| | | |
| Front Control arm - lower inner front bushing (anti-dive/caster correction)
| |
| Adds +0.5o caster + anti-dive | | | |
| 矯正增加 0.5 caster 角度 減少了前輪轉向不足以及前輪空轉，加上新的更堅固的襯套提供大幅增加入彎的底盤反應迫使caster 角度的更每次入彎一致的取向，也增加了套管耐用度 | Whiteline Anti Dive Kit is designed to add 0.5 deg static positive caster to both front wheels whil... <read more> |
| | | | |
(前輪)下後控制臂強化橡膠
| W0509
| | | |
| Front Control arm - lower inner rear bushing
| | |
| 前控制臂襯套對車輛的穩定性和制動效能有巨大的影響力。 WHITELINE的套件是專門設計用來提高底盤控制。 W0509還擁有陽極氧化合金管，以減輕重量。 | Worn front control arm bushings have a huge influence on vehicle stability and braking efficiency. W... <read more> |
| | | | |
變速箱前支架強化橡膠
| KDT926
| | | |
| Front Gearbox - positive shift kit bushing
| | |
| Faster shift response | | | |
| Bang For Your Buck! Whiteline's Postive Shift Kit inserts into the factory gearbox mount and results... <read more> |
| | | | |
前輪轉向座強化橡膠
| KSR210
| | | |
| Front Steering - rack & pinion mount bushing
| | |
| Heavy duty | | | |
| 增加轉向的精準度與回饋 | Whiteline steering rack mounts induce positive steering precision and feedback. Simple but very effe... <read more> |
| | | | |
| 前魚眼座 增加 0.75 caster / 減少 0.5 camber | KCA335
| | | |
| Front Strut mount - offset assembly (camber/caster correction)
| |
| High duro rubber +0.75o caster/-0.5o camber | | |
| Control with comfort - Com C uses Group N spec low compliance rubber & twin shielded bearing des... <read more> |
| | | | |
前李子串
|
| | | |
| Front Sway bar - link assembly
| | |
| Pair - adjustable extra heavy duty | | |
| Performance sway bar links utilising a heavy duty steel ball joint ends that adjust & rotate to ... <read more> |
| | | | |
| 前18mm傾桿座強化橡膠 | W23447
| | | |
| Front Sway bar - mount bushing 18mm
| | |
| Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective ... <read more> |
| | | | |
| (後輪)上控制臂 | W63225
| | | |
| Rear Control arm - upper inner bushing
| | |
|
| | | |
| 增加車身的控制 | Restore the rear end of your vehicle to as new condition and appearance with chassis control bushing... <read more> |
|
| | | |
| | | | |
| (後輪)上控制臂 *後輪CHAMER 角度可調 +-0.75度 | KCA326
| | | |
[
| Rear Control arm - upper inner bushing (camber correction)
| |
| On-car adjustable allows +/-0.75o camber | | |
| KCA326 is a rear camber adjusting kit consisting of a complete set of upper control arm replacement ... <read more> |
| | | | |
後主車架強化橡膠
| KDT921
| | | |
| Rear Crossmember - mount bushing
| | |
| Positive traction kit - locks subframe to body | | |
| 取代所有4個原廠後主車架襯套極大地降低後部橫梁的錯位和運動，讓車身更運動感. | The Whiteline kit replaces all 4 factory bushings in the rear subframe to dramatically reduce rear c... <read more> |
| | | | |
後主車架(插入)強化橡膠
| KDT922
| | | |
| Rear Crossmember - mount insert bushing
| | |
| 插入填充原廠的空隙大幅降低後交叉構件錯位, 可大幅改善車尾的轉向的不安定感 |
| The Whiteline inserts fill the voids of the factory bushings to dramatically reduce rear cross membe... <read more> |
| | | | |
後差速器強化橡膠
| KDT924
| | | |
| Rear Diff - mount in cradle bushing
| | |
| 解決惱人的後差速器異常震動與噪聲，同時確保適當的差速器小齒輪的角度來最大化的動力傳輸到車輪 | Fix annoying differential movement and noises whilst ensuring appropriate differential pinion angles... <read more> |
| | | | |
後差速器強化橡膠+後差速器連桿強化橡膠
| KDT925
| | | |
| Rear Diff - mount in cradle & support outrigger insert bushing
| |
| Contains inserts for both cradle & support outrigger | | |
| | | | |
解決惱人的後差速器異常震動與噪聲，同時確保適當的差速器小齒輪的角度來最大化的動力傳輸到車輪
| Fix annoying differential movement and noises whilst ensuring appropriate differential pinion angles... <read more> |
| | | | |
後差速器連桿強化橡膠
| KDT923
| | | |
| Rear Diff - support outrigger bushing
| | |
| Front mount | | | |
解決惱人的後差速器異常震動與噪聲，同時確保適當的差速器小齒輪的角度來最大化的動力傳輸到車輪
|
| Replace worn suspension bushings to as new condition and appearance with Whiteline black synthetic e... <read more> |
| | | | |
| 後可調式李子串 | KLC166
| | | |
| Rear Sway bar - link assembly
| | | |
| Pair - adjustable extra heavy duty | | |
| Performance sway bar links utilising a heavy duty steel ball joint ends that adjust & rotate to ... <read more> |
| | | | |
後可調式李子串 (舒適)
| KLC182
| | | |
| Rear Sway bar - link assembly COMFORT
| | |
| Pair - adjustable extra heavy duty | | |
| Performance sway bar links built with comfort in mind that adjust & rotate to any angular combin... <read more> |
| | | | |
後傾桿14mm強化橡膠
| W23448
| | | |
| Rear Sway bar - mount bushing 14mm
| | |
| KITS REQ'D: 1 | | | |
| Whiteline sway bar mounts utilise the latest technology synthetic elastomer combined with effective ... <read more> |
| | | | |
後輪拖曳臂襯套 | W63414
| | | |
| Rear Trailing arm - lower front bushing
| | |
| Restore the rear end of your vehicle to as new condition and appearance with chassis control bushing... <read more> |
發表於 2013-1-8 23:19
附有各項改裝功能
發表於 2013-1-9 00:32